Unofficial eMachines Tech Info

eMachineUpgraders Forum

 

Links
CPU
Jumpers
End User's Upgrades
Downloads
 

 

Models
eTower 300
eTower 333i
  eTower 333id
 
Trigem Como-3 Mainboard

Documented General Info:
 
Processor
Intel Celeron processor 266/300MHz
Single Edge Contact Cartridge design not include a dedicated L2 cache
Slot 1 connector
 
Chipset
Intel 440EX core and FDC37M602 Super I/O controller
High performance core chip with two BGA package
 
Memory
2 DIMM banks for EDO/SDRAM module
3.3V EDO/SDRAM supported (168pin unbuffered DIMM)
Supports up to 256MB (128MB x 2 banks)
 
Audio
Built-in high performance 3D ISA audio CODEC
Built-in ISA audio CODEC (CS4235B)
 
Video
Built-in AGP graphic controller (ATI RAGE IIC)
SGRAM 2Mbyte Video Memory on Board (32bit operation)
 
Onboard I/O Connectors
Two USB port (One in front panel, the other in rear port): Keyboard, Mouse, CCD Camera
Two PS/2 port: Keyboard, Mouse
Two Serial port: COM1 port and optional COM2 port by Header Connector
One Parallel port: DB25, LPT1
One Audio/Joystick port: 1 Speaker, 1MIC_IN, 1 LINE_IN, 1 MIDI/Joystick port (front panel)
One FDD connector: 34-pin, boxing type
Two E-IDE connector: 40-pin, boxing type, primary and secondary interface
One power connector: 20-pin, standard ATX power connector module
One power connector: 6-pin, 1394 power connector (option)
One AMC connector: 38-pin, ATI AMC interface
 
Onboard IDE
2 dual-channel enhanced PCI bus master IDE connectors
 
Expansion Slots
2 ISA, 2 PCI slots and 1 shared slot
 
BIOS
• N/A
 
Onboard LAN
• N/A
 
Protection and Management
ECC on memory, DMTF compliant software
Level-2 Alert generation in system temperature, voltage, FAN speed, chassis intrusion
Level-3 Remote wake up over LAN, service boot
Level-4 Resume to task, improved power management, OS independent management FAN off
Support Intel's OPSD manageability level-3
Remote wake up solution : LAN (option) and Modem
FAN control logic: CPU Fan, system Fan (option)
System chassis intrusion (option)
System voltage and temperature management (option)
 
Form Factor
microATX
243mm x 223mm x 1.6t (4 Layers)
 

 

Main

Back