BIOS Flash Instructions

These instructions are for files HPcog_303.exe and 
HP Cognac_307.zip ONLY!

Step 1. Create a boot disk. (DOS or win98)
It is best to delete any autoexec.bat and config.sys files 
from the boot disk so that no drivers are loaded at boot. This is 
the boot disk I normally use:
 

www.hellasystems.de/ftp/Utilities/BootDisk/DrDos70/drdflash.exe
 

It won't load any drivers and has plenty of room for the 
bios files. Just run the drdflash.exe file.

Step 2. Run the fresnoCognac_307.exe from within Windows.
When it asks for the folder to unzip to, be sure it says a:\ Be 
sure you have enough room on the floppy. You can do this to 
the boot floppy if you have enough room (about 600k) or use 
a blank floppy. You should see only the following files on the 
floppy if you used a blank floppy:
 

bios.rom
BIOSupdt.bat
ENQUIRE.COM
PHLASH.EXE
platform.bin
readme.txt
RelNotes.txt
 

Step 3. Boot from your boot floppy.

Step 4. If your bios files are on the boot floppy, run BIOSupdt.bat. 
If they are on a different floppy, change disks and run BIOSupdt.bat 
from that disk.

km6ti