Unofficial eMachines Tech Info

eMachineUpgraders Forum

 

Links
CPU
Jumpers
End User's Upgrades
Downloads
 

 

Models
eTower 366i
eTower 400i
Trigem Florida-C Mainboard

Documented General Info:
 
Processor
Intel Socket-370 (370pin PPGA Socket)
Intel Celeron 300A/333/366/400/433/466/500/533MHz processor support
 
Chipset
AGPsets PCI/AGP Controller: Intel 440LX
PCI bus mastering controller, and Power management interface: Intel PIIX4e
Graphics: ATi RAGE Pro Turbo with 4 or 8 MB SGRAM
Audio: Crystal CS4280 with Ac97 Codec(CS4297)
Super I/O: ITE8673
DC-DC Converter: SC1164
Clock: ICS9148BF (66MHz host clock support)
 
Memory
Two banks of 3.3V EDO/SDRAM (168pin unbuffered DIMM) with max 256MB
EDO/SDRAM operation in 66MHz front side bus
Flash Memory: Programmable 2MB Flash memory
 
Audio
Crystal CS4280 PCI audio controller with fully DOS Games compatibility via PC/PCI, DDMA support
Compatible with sound blaster, sound blaster pro, and window sound system
Enhanced Stereo full duplex operation
Advanced MPC3-compatible input and output mixer
Joystick port and MPU-401 compatible MIDI interface
PC97 and PC98 compliance (and compliance with preliminary PC99)
 
Video
ATi RAGE-3D IIc with 4 or 8 MB SDRAM
- Fully PC98 compliant
- Triple 8-bit palette DAC with gamma correction for true WYSIWYG color
- DDC1 and DDC2B+ for plug and play monitors
- Flexible graphics memory configuration : 4MB or 8MB SDRAM (Manufacture option)
· 2D Acceleration
- Hardware acceleration of Bitblt, Line Draw, Polygon / Rectangle Fill Masking, Monochrome
Expansion, Panning/Scrolling, Scissoring, full ROP support and hardware cursor
- Acceleration in 8/16/24/32bpp modes.
- Increased displays FIFO from 24 to 32 DWORDS
· 3D Acceleration
- Hidden surface removal using 16-bit z-buffering
- Full support for Direct3D texture lighting
- Dithering support in 16bpp for near 24bpp quality in less memory
 
Onboard I/O Connectors
Integrated standard I/O functions in the rear side
One multi-mode parallel port
One FIFO serial ports and optional port by header type
PS/2 styles keyboard and mouse port
One USB port
Three audio jack for Line input, Speaker output and MIC input
Integrated standard I/O functions in the front side
One Joystick port
One USB port
 
Onboard IDE
2 dual-channel enhanced PCI bus master IDE connectors
 
Expansion Slots
2 PCI, 2 ISA (1 shared)
 
BIOS
AMI, Y2K compliant
 
Onboard LAN
• N/A
 
IEEE 1394
• N/A
 
Form Factor
microATX
227mm x 244mm x 1.6t (4 Layers)
 

 


Main

Back