BIOS Flash Instructions

Although FLOTG200.exe its listed as being version 2.0...
when compared to the date of version 1.8, version 1.8 is 
newer. The v2.0 date is 6/7/00; v1.8 date is 8/16/00. 


--------------------------------------------------------------------------------
To use FLOTG200.exe: 
 
First copy the FLOTG200.exe file to your hard disk.
Then,  insert a 'GOOD' i.e. a known to be reliable, blank 
1.44 Mb floppy disk into the A: drive.
Double-click on the FLOTG200 file, whereupon it will write 
to the floppy.
Then, just re-boot the computer. A Windows Startup Disk  
is not needed, as the disk in the A: drive has itself been 
made into a boot disk.
The AMIFAUTO program will then automatically flash the 
new BIOS.
 
Note: The usual warnings about flashing a BIOS apply. 
Using this method does NOT allow you to save your old bios. 
Thanks to "RandD" for this info and supplying the file.