Liverpool Read Me


Not following the instructions exactly may result in damage to your system. Proceed at your own risk.  

WARNING ! Interrupting, or powering off your system during the flashing process could permanently damage your system. 
To Flash Your System BIOS, Follow The Instructions Below

1. Download the self-extracting file below. 
2. When asked to run the file from its current location, or to save the file click run. 
3. When the file finishes downloading, a self-extracting dialog box will appear. 
4. Insert a blank floppy disk into the floppy disk drive, and click the OK button.
NOTE: If there are any files on this disk, they will be erased. 
5. The files will now be extracted to the floppy disk in drive A: 
6. When the extraction process has completed, leave the floppy in the floppy drive, and restart the system. 
7. A short flash utility will take place 
8. When complete, the system will automatically reboot. 
9. After the system reboots, you will see the message below. 
F1 to run Setup 
F2 to load default values and continue 
10. Please remove the floppy disk from the disk drive, and press F2 to load default values and continue. 
11. You have now completed the BIOS update process.