|
|
Jumper |
Type |
Description |
Setting
(Default) |
|
JP1 |
3 pin |
Clear CMOS |
1-2: Clear
2-3: Normal |
|
JP2 |
2 pin |
BIOS protect |
Short: Enable
Open: Disable |
Jumper
1 – Enables you to clear the BIOS. Follow these
instructions:
1. Turn
the system off.
2. Short
pins 1 and 2 on jumper 1.
3. Return
the jumper to the normal setting.
4. Turn
the system on. The BIOS is returned to the default
settings.
Jumper
2 – Enables you to prevent the BIOS from being
updated (flashed). Open the jumper if you are going to
update your BIOS. After updating the BIOS, short the
jumper to protect the BIOS from being flashed. |
Unofficial eMachines Tech Info