Delhi-3 Modified Bios Flash Procedure
 
DELHI-III PATCHED BIOS FOR AMD K6+ CPUs

ACKNOWLEDGEMENTS

The emachines Upgraders Group's Founder, Moderators and 
Members express their warm thanks to "JAN STEUNEBRINK" 
who developed a successful patch for the Delhi-III bios which 
now allows AMD K6+ CPUs and the internal cache to be recognized 
without using the former "cacheon" method.

Thanks also go to the following people for their contribution 
to this challenging work:

"TJ seven", who provided the contact/connection with 
Jan Steunebrink.

"Cpg23c", who provided the easy, convenient and quick 
way to flash the bios.

"Bernard78170", who performed the testing of the new 
patched bios on the 333cs machine.
======================================================
PROCEDURE FOR INSTALLING THE MODIFIED DELHI-III BIOS 

1) Download and unzip file E120_j1.zip and unzip the contents of this 
file to a floppy.

2) Turn OFF the computer and remove the old CPU.

3) Adjust the jumpers and switches to match the required voltages, 
FSB (100) and desired CPU multiplier. Check this step twice; do not 
blow-up your CPU with a bad voltage!

4) Install your K6+ CPU, and the original heatsink with some thermal 
paste.

5) Insert the diskette in the machine, hold down CTRL+HOME while 
turning ON the machine.

6) Release CTRL+HOME after hearing the first beep. You will hear a 
series of 4 beeps, then 2 beeps. The emachines splash screen will 
show up, and the boot screen will stop and display that the flash is 
successful. You will be asked to press F1 or F2 to access the setup 
menu or continue. At this point, you can remove the diskette (otherwise 
the system will stop again with an "invalid system disk" message).

7) Let the system load Windows completely. You can always go back 
to the bios setup and readjust your preferences if necessary.

8) Voilą! You are done. Congratulations.

 MISCELLANEOUS

As an example, I am providing my results based on my K6-2+/475 
running at 500 (100x5.0). Yours may be different if your CPU/FSB/Multiplier 
settings are different.

> My CPU voltage: 2.0 V / Multiplier: x 5.0

> My FSB bandwidth: 100

> My switches and jumpers:

SW1 / SW2 / SW3 / SW4 = Off / Off / Off / Off.

J15 = 2-3 (no change).

J2 / J9 / J3 / J4 / J5 = 1-2 / 2-3 / 1-2 / 1-2 / 1-2.

J11 / J12 / J13 = 1-2 / 2-3 / 2-3.

> My boot screen:

AMIBIOS (C) 1999 American Megatrends Inc.,Version 1.20 - patch J.1 04/04/03

AMD-K6(tm)-3/450,450MHz

Checking NVRAM.. Update OK!

NVRAM Checksum Bad, NVRAM Cleared

262144KB OK

WAIT...

105: CMOS Settings Wrong

Press F1 to Run SETUP

Press F2 to load default values and Continue

(C) American Megatrends Inc.,

52-311C-042699-00101111-071595-VT598-DELHI3-EM-F

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Bernard78170