***************************        WARNING       ***************************
                            USE AT YOUR OWN RISK
***************************                      ***************************

This is a modded version of Emachine’s Bios for the MS-7145 Motherboard v1.09


Added Support: 

.       Advanced Chipset Options
.       Advanced Chipset Features
.       Integrated Peripherals
.       PNP\PCI Configurations
.       Power Management
.       
 


To Install

1.	Install a new disk into Floppy Drive and run drdflash.exe this will make you a clean bootable floppy.

2.	Copy AWFL859G.exe and the V1.09L.BIN files to floppy.

3.	With floppy installed, restart system.(Make sure Floppy is your first Boot device.)

4.	At the “A” prompt, type “AWFL859G” (without the quotation marks).

5.	Enter your new .bin file “V1.09L.BIN” and press Enter.

6.	Answer yes (Press “Y”) to back-up your old Bios. Enter in a name like “oldbios.bin” 
        or “backup.bin” don’t forget the .bin

7.	Answer yes to flash.

8.	After flash is finished you'll see instructions to “Remove disk and press F1” system will reboot.
 
9.	Enter Setup to check all settings. If unable to enter setup, manually Shut Down and remove System Battery 
        or find jumper to clear cmos then Restart and enter Setup to check all settings.
  

Notes:

·	Before flashing any Bios it is highly recommended that you take time to write down all setting in Setup 
        for future reference.

·	This is a modded version of Emachine’s Bios. 
        By using this modded version your System Restore Disks should still work on your system. 
        

·	Please, take the time to let all of us know your feedback on these Bios at the EmachineUpgraders Forum. 
        This is the only way we’ll know if our work needs any adjustments. 
        All feedback welcome.

.       Can read more about this Bios Update at: 
        http://s8.zetaboards.com/emachineupgraders/index.php?showtopic=3321&st=20&#last




Lubner10