• Support for an Intel® Core™2 Duo processor
in an LGA775 socket with a 1066 or 800 MHz
system bus
• Support for an Intel® Pentium® D processor in
an LGA775 socket with an 800 or 533 MHz system
bus
• Support for an Intel® Pentium® 4 processor in
an LGA775 socket with an 800 or 533 MHz system
bus
• Support for an Intel® Celeron® D processor in
an LGA775 socket with a 533 MHz system bus
Chipset
• Intel® 945GC Express Chipset
Memory
• Two 240-pin DDR2 SDRAM Dual Inline Memory
Module (DIMM) sockets
• Support for DDR2 533 or DDR2 400 MHz DIMMs
• Support for up to 2 GB of system memory
Audio
• 6-channel (5.1) audio subsystem using the
Realtek* ALC883 audio codec
Onboard I/O Connectors
• Legacy I/O controller for diskette drive,
serial, parallel, and PS/2 ports
Peripheral Interface
• Eight USB 2.0 ports
• One serial port
• One parallel port
• Four Serial ATA interfaces
• One parallel ATA IDE interface with UDMA 33,
ATA-66/100/133 support
• One diskette drive interface
• PS/2 keyboard and mouse ports
Expansion Slots
• Two PCI Conventional* bus add-in card
connectors
• One PCI Express* x1 bus add-in card connector
• One PCI Express* x16 bus add-in card connector
BIOS
• Intel BIOS (resident in the SPI Flash
device)
• Support for Advanced Configuration and Power
Interface (ACPI), Plug and Play, and SMBIOS
Onboard LAN
• 10/100 Mbits/sec LAN subsystem using the
Intel® 82562G Ethernet Controller
microATX (9.60 inches by 9.60 inches [243.84
millimeters by 243.84 millimeters])
Other
• Support for PCI Local Bus Specification
Revision 2.3
• Support for PCI Express Revision 1.0a
• Suspend to RAM support
• Wake on PCI, RS-232, front panel, PS/2
devices, and USB ports
• Hardware monitoring
and fan control through the SMSC 5127 I/O
controller
• Voltage sense to detect out of range power
supply voltages
• Thermal sense to detect out of range thermal
values
• Three fan headers
• Three fan sense inputs used to monitor fan
activity
• Fan speed control
For more info on this motherboard, download the
manual in the download section.
Unofficial eMachines Tech Info