• Supports Intel® Pentium 4 / Celeron D
processors in LGA775 package.
• Supports up to Pentium 4 5xx, 6xx(EM64T) and
Celeron D 3xx sequence processor.
• Support Intel 04B and 04A processors.
• Supports Intel Hyper-Threading Technology.
• Supports Intel new technology "EIST".
- ATX 24-Pin power connector
- 4-pin ATX 12V power connector
- CPU / System FAN connectors
- CD-In connector
- Front panel connector
- Front panel audio connector
- 1 x Floppy disk drive connector
- 4 x Serial ATA connectors
- 2 x ATA133 HD connectors
- 1 x IEEE 1394 connectors support additional 1
ports (Optional)
- 2 x USB 2.0 connector support additional 4
ports
- SPDIF-Out connector (Optional)
- TV-Out connector (Optional)
- Clear CMOS Jumper
• An IDE controller on the ATI® SB450
chipset provides IDE HDD/CDROM with PIO, Bus
Master and Ultra DMA 66/100/133 operation modes
- Can connect up to 4 IDE devices
• Serial ATA/150 controller integrated by ATI®
SB450
- Up ot 150MB/s transfer rate
- Can connect up to 4 serial ATA devices
• One PCI Express x 16 slot. (supports PCI
Express Bus specification v1.0a compliant)
• One PCI Express x 1 slot. (supports PCI
Express Bus specification v1.0a compliant)
• Two 32-bit v2.2 Master PCI bus slots. (support
3.3v/5v PCI bus interface)
• The mainboard BIOS provides "Plug & Play"
BIOS which detects the peripheral devices and
expansion cards of the board automatically.
• The mainboard provides a Desktop Management
Interface(DMI) function which records your
mainboard specifications.
• Supports boot from LAN, USB Device 1.1 & 2.0,
and SATA HDD.
Onboard LAN
• Realtek® RTL8100C or 8110SB LAN chipset
- Integrated Fast Ethernet MAC and PHY in one
chip
- Supports 10Mb/s, 100Mb/s and 8110S supports up
to 1000Mb/s.
- Compliance with PCI v2.2
- Supports ACPI Power Management
Realtek 8100C available
in RC410M-L, RC410M-LA
Realtek 8110SB available in RC410M-F, RC410M-FI
IEEE 1394
• VIA® 6307 chipset
- Supports up to two 1394 ports. (Rear panel x1,
pinheader x1)
- Transfer rate is up to 400Mbps