|
|
Jumper |
Type |
Description |
Setting
(default) |
|
JP1 |
3-pin |
Clear CMOS |
1-2: Normal
2-3: Clear |
|
JP3 |
3-pin |
CPU Frequency |
1-2: 100Mhz
2-3: 133Mhz |
|
JP2 |
3-pin |
BIOS
protection |
1-2: Enable
2-3: Disable |
Jumper 1 –
enables you to clear the BIOS. Follow these
instructions:
1. Turn
the system off.
2. Short
pins 2 and 3 on JP1.
3. Return
the jumper to the normal setting.
4. Turn
the system on. The BIOS is returned to the default
settings.
Jumper 3 –
set the CPU frequency (100MHz or 133MHz) according to
the CPU.
Jumper 2 –
enables you to prevent the BIOS from being updated
(flashed). Set the jumper to disabled if you are going
to update your BIOS. After updating the BIOS, return it
to the default setting (enabled). |
Unofficial eMachines Tech Info