• Supports Socket A for AMD® Athlon™/Athlon™
XP/Duron™ processors @FSB 100/133/166
• Supports 600MHz up to Athlon™ XP 2700+
processor or higher
Chipset
• nVIDIA® nForce2 IGP Chipset
- Supports DDR266/333 with internal graphic
core, DDR266/333/400 with external add-on card
- Supports external AGP 8X/4X
- Integrated TV encoder
• nVIDIA® nForce2 MCP2 Chipset
- AC97 Interface supporting up to two concurrent
codecs
- Ultra ATA133 for the fastest hard disk
throughput
- USB 2.0 EHCI/1.1 OHCI controller
Memory
• Supports four memory banks using two
184-pin DDR DIMMs
• Supports up to 2GB PC3200/2700/2100/1600 DDR
SDRAMs
• Supports both 64-bit and 128-bit DDR SDRAM
NOTE: nForce2 only NOT support x4 memory device.
1GB can be made by other density of dram chip
such as x 8, x16.
• nVidia nForce2 IGP chipset with internal
graphic core assign up to 128MB with the total
system memory 256MB or above.
Onboard I/O Connectors
- 1 floppy port that supports two FDD with
360KB, 720KB,1.44MB and 2.88MB
- 1 serial port and 1 VGA port
- 1 parallel port supports SPP/EPP/ECP mode
- 3 audio ports in vertical
- 6 USB ports (Rear * 4/ Front * 2)
- 1 RJ-45 jack
Onboard IDE
• An IDE controller on the MCP chipset
provides IDE HDD/CDROM with PIO, Bus Master and
Ultra DMA133/100/66 operation modes
• Can connect up to four IDE devices
• One AGP (Accelerated Graphics Port) 1.5V
4x/8x slot
• Three 32-bit PCI bus slots (support 3.3v/5v
PCI bus interface)
• One CNR slot
BIOS
• The mainboard BIOS provides "Plug & Play"
BIOS which detects the peripheral devices and
expansion cards of the board automatically.
• The mainboard provides a Desktop Management
Interface (DMI) function which records your
mainboard specifications.
Unofficial eMachines Tech Info